Purpose of the document

The Guide for configuring and working with the ZKTeco PUSH SDK integration module is a reference and information manual and is intended for configuration specialists and operators of the ZKTeco PUSH SDK integration module. This module is a part of the Access Control System implemented on the basis of ACFA.

The Guide has the following information:

  1. General information about the ZKTeco PUSH SDK integration module.
  2. Adding the ZKTeco PUSH SDK integration module
  3. Configuring the ZKTeco PUSH SDK integration module.
  4. Working with the ZKTeco PUSH SDK integration module.

General information about the ZKTeco PUSH SDK integration module

The ZKTeco PUSH SDK integration module is a part of the ACS implemented on the basis of ACFA and is used to control the hardware of the ZKTeco system.

For detailed information about ZKTeco PUSH SDK ACS, refer to the official reference documentation for this system (manufacturer ZKTeco).

For the correct operation, you must install ZK Teco SDK.

Before configuring the ZKTeco PUSH SDK integration module, you must do the following:

  1. Install the ZKTeco PUSH SDK hardware on the protected facility (see the official ZKTeco reference documentation).
  2. Connect the ZKTeco PUSH SDK hardware to the Axxon One server (see the official ZKTeco reference documentation).