Configuring the Tattile cameras with function of plates recognizing

It is possible to use in the Auto-Intellect software package the following cameras with function of plates recognizing: VEGA Acsess and VEGA III by Tattile manufacturer.
Configuring of these cameras is performed the following way:

1. Go to the «Plate reader» tab in the camera settings program and select the «General» item of menu. From the «Acquisition Mode» drop-down list select the «FREE_RUN» value to send data by camera ().

Fig. 7.2—34 Settings of Tattile camera

1. In the «Plate reader» tab select the «Events/Actions settings» (Fig. 7.2—35).

Fig. 7.2—35 Events/Actions settings

1. In the displayed list click the «TCP Message (Ocr Read)» parameter and configure it the following way in the opened box ():

Fig. 7.2—36 TCP Message on Ocr Read

• Enter the whole list of metadata in the «Message» field considering the follows:
• specify «IMAGE_BW» to send frames by camera;
• only plates will be observed at minimum resolution;
• specify a date and time in the list to send time intervals to the database.

At the moment of writing the document the following types are supported:
%DATE%TIME%PLATE_STRING%PLATE_COUNTRY%OCRSCORE%SPEED%CLASS%DIRECTION%IMAGE_BW%PLATE_MIN_X%PLATE_MIN_Y%PLATE_MAX_X%PLATE_MAX_Y.

• Enter the IP address of the computer with installed Auto-Intellect software in the «Server IP» field;
• Enter the number of port at which data will be sent in the «Server Port» field. The fixed port for the Intellect software package is 32000. Ensure that this port is not used by other processes.

After the required settings are performed, create and configure the corresponding objects in the «Auto-Intellect» software package:

1. Go to the «Hardware» tab of the «Settings» dialog box of the Auto-Intellect software. Create the «Video Capture Card» on the base of «Computer» object. In the right part of «Hardware» tab the settings panel will display ():

Fig. 7.2—37 Video Capture Card settings panel

1. Select the type of configured camera in the «Type» drop-down list (Fig. 7.2—37, 1).
2. Enter the IP address of connected device in the «IP address» field (Fig. 7.2—37, 2).
3. Enter the number of port in the «Port» field (Fig. 7.2—37, 3). Default number of port is 31000.
4. To save changes click the «Apply» button (Fig. 7.2—37, 4).

For working of remote identifier do the following:

1. Create the «Embedded detector» object on the base of «Camera» ongect. Enter the «anpr-detector» value in the «id in device form» field. (Fig. 7.2—38)

Fig. 7.2—38 Embedded detector settings panel

1. To save changes click the «Apply» button.

For license plates identification in the Auto-Intellect, create the "Remote detection" object on the base of the "LPR channel" object (Fig. 7.2—39) and configure the "LPR channel object" (see Setting up the LPR channel).
Fig. 7.2—39 The "Remote recognition" object
Configuring of VEGA Access and VEGA III cameras by Tattile manufacturer for working with the Auto-Intellect software package is completed.
Note. The camera will send frames and metadata while the detector operation.