Documentation for Axxon PSIM 2.0. Documentation for other versions of Axxon PSIM is available too.

Previous page Next page


The Live sound switch object is created on the basis of the Display object on the Interfaces tab of the System setting window.

To configure the Live sound switch object, do the following:

  1. Go to the Choose devices tab on the setting panel of the Live sound switch object.
  2. Configure the position of the Live sound switch object window in one of the following ways:
    1. Manually:
      1. Enter the coordinates of the upper left corner: the X (the horizontal indent from the left screen border) and Y (the vertical indent from the upper screen border) fields (1). Coordinates are expressed as percentages relative to the screen size horizontally and vertically.
      2. Enter the window dimensions: the W (the width of the window) and H (the height of the window) fields (2). Dimensions are expressed as percentages relative to the screen size horizontally and vertically.
    2. Using the test window:
      1. Click the button (3).

      2. Place the opened Specify dimensions test window where the Live sound switch window must be displayed.

    3. Click the OK button.
      As a result, coordinates in the X, Y, W, H fields are set in accordance with the size and position of the test window.

  3. From the Monitor drop-down list (4), select the number of the monitor in the system for which coordinates are set and on which the live sound switch must be displayed.
  4. Add audio sources in the Audio inputs field in one of the following ways:
    1. One by one:
      1. From the drop-down list in the Number column (5), select the number of the Microphone object, or in the Name column (6), select the name of the Microphone object. Other columns are filled in automatically.

      2. Repeat step i for all required Microphone objects.

        Note

        To add a new line to the table, click the "down" button on the keyboard. To remove a line, select it and press Ctrl+Del.

    2. Several microphones from the list:
      1. Click the Range button (7). As a result, the Add devices window opens.
      2. In the list on the left, select the required microphones to add (1). To select several lines, you must left-click them while holding down the Ctrl key on the keyboard.

      3. Move microphones to the list on the right (3) using the button (2).

        Note

        To remove audio sources from the list on the right, select them and click the button.
      4. Click the Apply changes and close button (4).
      5. As a result, the selected microphones are added to the list on the settings panel of the Live sound switch object.
    3. All microphones created in the hardware tree: click the All button (8).
  5. From the Sort drop-down list (9), select the sorting method in the audio inputs list: by number or by name.
  6. Add audio receivers in the Audio outputs field and configure sorting similarly to audio sources in steps 4 and 5.
  7. Go to the Advanced settings tab and set the External window when playing files checkbox if you want to open the window with playback progress in the interface of the Live sound switch window when playing files:

    If you clear the checkbox, then the progress is displayed as a percentage in the speaker name during the playback.
  8. Click the Apply button to save the changes (10).

Configuring the Live sound switch object is complete.

  • No labels