If a camera has an embedded storage, the system automatically creates the corresponding object. 

To configure an embedded storage, do the following:

  1. Go to the Devices tab.
  2. Select the Embedded storage object from the child objects of the camera.
    ParameterValueDescription
    Send settings to device

    		By default, the checkbox is set. This option allows you to send the settings from Axxon One to the web interface of the camera so that the camera adapts its internal parameters to these settings. To disable the option, clear the checkbox

    EnableYesBy default, the embedded storage is disabled. To enable it, select Yes
    No
    NameEmbedded storageEnter the object name
    Cache depth0

    Specifies the period (in days) during which the information on recordings is preloaded into RAM to speed up the operation. The background caching speeds up the display and processing of the archive data. The recommended value depends on the intensity of operation with the archive. With the 0 value (default), caching is disabled. The value must be in the range [0, 365]

    Cache update period0Enter the cache update period in seconds. The value must be in the range [0, 86400]
  3. Click the Apply button.

Configuration of an embedded storage is complete. If an embedded storage is enabled in the system, the data from it are available for viewing (see Selecting an archive) and replication to the system archive (see Configuring data replication).

  • No labels