Setting up an access schedule

To set up an access schedule for a Hikvision  reader, do the following:

1. Go to the settings panel of the Hikvision 26X Reader or Hikvision 28X Reader.
   
2. Click on the Access Plan Setup button. The Reader Access Plan Setup window opens.
   
3. Set the schedule in the Reader Access Plan window: 

   1. Set your required access schedule in the corresponding pane (1).

      Note.

      The Sleep access type stands for the sleep mode. The reader is not operable in this mode.

      The Card + Pass access type means that you first need to swipe the card and then enter the password, only then the access is granted.

      The Card/Auth.Pass access type means that you can swipe the card OR enter the password to access.

   2. In the week day's column (2), use your mouse to set the required time slot (3).
   3. You can edit the time values for each slot (4): starting time in the left field and ending time on the right.
   4. Repeat steps 3a — 3c as necessary.
4. Click the OK (5) button to save your settings.

The access schedule for the Hikvision reader is now configured.