Previous page Configuring the Servers list in the AxxonNet iOS client  Configuring the SSL in the AxxonNet iOS client Next page

You can configure the Camera list in the FEED COLUMNS section. For this, do the following:

  1. Select the type of the camera list display:
    1. grid—display cameras as a grid (default).
    2. list—display cameras as a list.
  2. If you want to display only the active cameras in the list, enable the Show only active parameter.
  3. Select the type of the camera sorting:
    1. unsorted.
    2. id—sorting by the ID number.
    3. name—sorting by the name (default).
    4. manual—manual sorting. If you select this type, custom sorting will become available (see Custom camera sorting in the AxxonNet iOS mobile client).
  4. If you want to display the camera IDs at the beginning of their names, enable the Show id parameter.
  5. If you want to search for the cameras on the Cameras tab, enable the Search parameter.
  6. Using the and buttons, increase or decrease the value of the Landscape and Portrait parameters. The values of these parameters specify the number of camera columns in the corresponding position of the device. The maximum value that can be specified in the Landscape and Portrait parameters is 10.
    Example: with the Portrait: 3 parameter value, the number of the camera columns when the device is vertical will be three    .

    With the Landscape: 4 parameter value, the number of the camera columns when the device is horizontal will be four.
  • No labels