Introduction into the Guide for configuring and working with the Sigur 2.0 integration module

Purpose of the document

The Guide for configuring and working with the Sigur 2.0 integration module is a reference and information manual and is intended for configuration specialists and operators of the Sigur 2.0 integration module.

The Guide has the following information:

1. General information about the Sigur 2.0 integration module.
2. Configuring the Sigur 2.0 integration module.
3. Working with the Sigur 2.0 integration module.

General information about the Sigur 2.0 integration module

The Sigur 2.0 program integration module is a part of ACS implemented on the basis of ACFA PSIM that is used to monitor the ACS Sigur 2.0 devices. You cannot control and configure the Sigur 2.0 hardware in ACFA PSIM.

Before working with the Sigur 2.0 integration module, install the necessary hardware on the protected facility and perform the initial configuration of the ACS Sigur 2.0 devices.

Also, you must connect to the Sigur 2.0 server with the installed Sigur manufacturer's software.