Go to documentation repository
Documentation for Axxon One 2.0. Documentation for other versions of Axxon One is available too.
Previous page Next page
To create the People counter detector, do the following:
- Create the Human pose detector (see Configuring the Human pose detector).
- Below the Human pose detector, click Create… → People counter.
The People counter detector counts the number of people in the specified area using the metadata of the Human pose detector.
An event, on the basis of which a macro can be started (see Configuring start conditions), can be generated if the number of people in the frame meets the specified conditions.
Note
- Unlike the Multiple objects detector (see Configuring Multiple objects), the counter generates events of just one type—triggering.
- Unlike the Neural counter (see Configuring the Neural counter), People counter counts only people.
If necessary, you can change the detector parameters. The list of parameters is given in the table:
| Parameter | Value | Description |
|---|---|---|
| Object features | ||
| Record mask to archive | Yes | Mask is recorded to the archive by default. To disable the parameter, select the No value |
| No | ||
| Other | ||
| Enable | Yes | The detector is enabled by default. To disable the detector, select the No value |
| No | ||
| Name | People counter | Enter the detector name or leave the default name |
| Type | People counter | Name of the detector type (non-editable field) |
| Basic settings | ||
| Alarm when value | In range | Specify when the detector must generate an event: when the number of people in the specified area is within the set range or out of the range |
| Out of range | ||
| End value of alarm range settings | 100 | Specify the range of the number of people in the frame. The value must be in the range [0, 100] |
| Event interval | 1 | Specify the interval in seconds between two consecutive events of the detector when the number of people in the frame continuously meets the specified conditions. The value must be in the range [1, 10000] |
| Number of measurements in a row to trigger detection | Specify the minimum number of frames with the set number of people for the detector to generate an event. The value must be in the range [1, 20]. | |
| Start value of alarm range settings | 5 | Specify the range of the number of people in the frame. The value must be in the range [0, 100] |
If necessary, you can configure the detection area. For this, do the following:
- Click in the preview window.
- Select Area of people counting.
- Set the detection area using the anchor points
. You can create multiple areas.
Note
- For convenience of configuration, you can "freeze" the frame. Click the
button. To cancel the action, click this button again. - The area for detection is displayed by default. To hide it, click the
button. To cancel the action, click this button again. - To delete the detection area, click the
button.
To save the parameters of the detector, click the Apply 
button. To cancel the changes, click the Cancel 
button.
Configuration of the People counter is complete.
In the Surveillance window on the layout next to the counter icon, you can add text and the number of people counted by the detector (see Displaying the number of detected objects).
Overview
Content Tools