Documentation for Axxon PSIM 2.0. Documentation for other versions of Axxon PSIM is available too.

Previous page Next page


Video capture cards are configured in the course of Axxon PSIM™ software administering. Video capture cards are configured by video signal digitization and processing settings, which comply with:

  1. signal format (PAL or NTSC);
  2. frame rate;
  3. frame resolution;
  4. brightness;
  5. contrast;
  6. color depth;
  7. color rendition format.

Each camera has its individual video signal processing and digitization settings (except for the signal format, which is set for all cameras, and is attached to the same ADC).

Note

In multistream mode (see Configuring the multistream video) settings of signal format parameters (PAL or NTSC), frames frequency, frame resolution is performed for each video stream separately on the Camera object’s settings panel on the Video stream tab (see the The settings panel of the Camera object section).

Moreover, configuring the video grabber involves setting up a proper switching of the video input channels.

Configuring video capture cards in Axxon PSIM™ software

Configuring the video signals processing mode while using video capture cards and analog video cameras

  • No labels