Configuring the Face detection module combined work with thermal camera or external system

Configure the Face detection module operation with a thermal camera or an external system as follows:

1. Go to the External source tab on the settings panel of the Face Detection object.
   

2. From the Combined work drop-down list (1), select the combined operation mode:

   • No—combined operation mode is not used.

   • Combine with thermal camera temperature—receiving the temperature and coordinates of a captured face frame from the thermal camera. A photo of a captured face will be obtained from the capturing camera. If this mode is selected, the following setting become available:

     • Thermal camera reply timeout, s (2)—sets the timeout in seconds for receiving data from the thermal camera.

       Note

       The FIND_PERSON event will be generated only when the temperature is received from the thermal camera or after the time specified in the Thermal camera reply timeout, s parameter.

   • Get photo from thermal camera—receiving the temperature and photos of a captured face from the thermal camera.

   • Get photo and metadata from external system—receiving the temperature and photos of a captured face from a thermal camera or Axxon Next.

3. Click the Apply button (3) to save the changes.