Configuring the C3-100 controller

The controller C3-100 is configured on the settings panel of the AC ZK Controller C3-100 object which is created on the basis of the AC ZK object on the Hardware tab of the System settings dialog window.
To configure the C3-100 controller, do the following:

1. Go to the settings panel of the AC ZK Controller C3-100 object.
2. From the Gate: drop-down list select the type of controller connection: via Ethernet or RS-485 standard (1).
3. In the Password: field enter the password for controller connection (2).
4. In the IP: field enter the IP-address of the controller (3).
5. From the Anti-passback: drop-down list select the rule of anti-passback operation:

Disable – the anti-passback function is disabled
Readers of Door 1 – the anti-passback function is enabled between the readers of Door 1.

1. The Interlock function is always disabled for the single-door controller (4).
2. From the Backup period: drop-down list select the time interval in minutes for ??? (5).
3. Set the Watch dog checkbox ??? (6).

Note. The version of firmware and serial number of controller will automatically displayed in the corresponding fields while connecting the controller.

1. Click the Apply button (7).

Configuring of the C3-100 controller is completed.