Previous page Next page
To view the live video, select the necessary camera.
As a result, a a viewing tile for the camera opens. You can switch to a neighboring camera by swiping left or right on the screen. The cameras are scrolled on a loop, taking into account their current sorting and filtering (see Displaying and searching for cameras in AxxonNet client on Android OS).
Note
If the mjpeg playback format is selected (see Configuring video in AxxonNet client on Android OS) and the captioner is configured for a camera in Intellect (see The Captioner object setup), then the captions will be displayed over the video image on the screen. The captions can be scrolled if there are many of them and they all do not fit on the screen.
To select a playback format, video stream or video resolution, click the 
button.
Note
The default playback format and video resolution are configured in video settings (see Configuring video in AxxonNet client on Android OS).
If the mp4 playback format is selected and the connection to the Axxon Next Server is established, then you can select the required video stream on the Live tab.
Attention!
Video stream selection is not available on the Intellect Server connection.
Select the video playback format (1):
mjpeg — supports all codecs, the most resource-intensive format;
mp4 over ffmpeg — less resource-intensive than mjpeg, supports the H.264 and H.265 codecs, the video is transmitted via the RTSP protocol.
Attention!
To ensure the operation of this playback format, it is necessary to configure the RTSP Server (for Intellect see Configuring RTSP Server module, for Axxon Next see Configuring an RTSP Server).
Note
If the mp4 over ffmpeg playback method is selected, which does not support the codec used by the camera, then it will be automatically switched to mjpeg. If you view the video from the Intellect Server, the playback format switch may take 8-9 seconds. If you view the video from the Axxon Next Server, then the playback format is switched without delay.
If the mjpeg playback format is selected, then you can select the required resolution on the Live tab.
If there is a microphone on the camera and the mp4 over ffmpeg playback format is selected in the video settings (see Configuring video in AxxonNet client on Android OS), then audio from the camera will play. To disable audio from the camera, click the 
button, to enable it, click 
.
To view the video in full screen, click the 
button. To return, click anywhere on the screen.
To view the video in picture-in-picture mode, click the 
button. To return to viewing the video in normal mode, click on the floating window with the video.
To minimize the video controls, click the 
button. In this mode, you can view the archive (see Viewing the video archive in AxxonNet client on Android OS).
To return to the list of cameras, click the 
button or Back on the mobile device.