Documentation for Axxon Next 3.5.1. Documentation for other versions of Axxon Next is [available too].

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

To work with IP devices, you need to connect the Axxon Next server to the local network where the required IP devices are enabled.

Based on the video signal coming in from the IP device, an assessment is made of the guarded location and the system responds to events registered for that location. The content and quality of the obtained video information depends on how the IP device is installed and configured. There are a number of rules that must be followed to obtain a high-quality video signal. In particular, high-quality peripheral equipment (hubs/routers) must be used; Home/Office devices, which are not intended for use in these kinds of security systems, are unacceptable.

Note

IP devices connected to such equipment will transmit a video stream with an unacceptably long delay (from 1.5 to 3 seconds per frame)

Detailed information about creating a local network and connecting IP equipment to it is presented in the corresponding reference documents.

  • No labels