Documentation for ACFA PSIM 1.3.

Previous page Pre-configuration of the STX ACS  Configuring the STX controller Next page

The STX ACS connection is configured as follows:

  1. Create an STX object on the Hardware tab.
  2. Create a transport channel object based on an STX object.
  3. On the transport channel object settings panel, in the Channel IP (1) and Channel port (2) fields, specify the IP address and port of the Moxa server (see Pre-configuration of the STX ACS).
  4. In the Poll timeout(msec) field (3), enter the time of the controller polling period in milliseconds. The controller polling period cannot be less than 500 ms.
  5. Click the Apply button (4).

The STX ACS connection is now configured.

  • No labels