Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Release Notes Intellect 4.11.1  Notes for Intellect weekly builds Next page


Release Notes Intellect 4.11.0

Release Notes Intellect 4.11.1

On the page:

New Features and Enhancements

Distribution kit and installation

  1. The release includes a new Drivers Pack 3.68 version.
  2. The Intellect distribution kit includes the Axxon Player version 2.4.0.1292 
  3. Added the ability to update Intellect in silent mode without removing vertical solutions 
  4. The distribution package contains an updated version of the Intellect SMS Sender application.
  5. The distribution package contains the Visual C ++ Redistributable Package for Visual Studio 2015.
  6. The installer now allows you to disable the installation of Elastic Search search engine.
  7. The intellect64.exe file is now located in the modules64 folder.
  8. A portable version of the utility for reading board codes and hardware protection key CodeReader.exe has been implemented, which allows using this utility without installing Intellect 
  9. Added Romanian and Vietnamese to the Language Pack 

Events control and processing

  1. Push notifications are now sent via AxxonNet cloud service . Android and iOS devices are supported.
  2. When configuring the Operator Protocol and Event Protocol, added the ability to bulk-select events 
  3. The Operator protocol was improved:
    1. Added a simplified (text) view of the Operator Protocol window.
    2. Added the ability to group information in the Operator Protocol by region, event or object.
    3. Added a function to automatically delete information about performing an action when unchecking the action in the checklist.
    4. The Operator Protocol now includes a setting to enforce user comments before classification of events 
    5. Added an event about generating a report from the Operator Protocol 
    6. In the Operator Protocol, the specified size and position of the window with a screenshot is saved for each event
    7. Added the Single selection parameter to the Operator Protocol settings, which allows you to prohibit the multiple selection of events in the operator protocol.
  4. Reports can now be exported to csv format from the Event Viewer
  5. The IGNORE_KEEP_NO_LESS event added to indicate that there is not enough disk space to store archive for the period set by the Keep to less than parameter 
  6. When running a macro, the event viewer now contains the username and user ID  
  7. Added the events which are generated when the operator increases and decreases the size of the Surveillance window on the layout 
  8. Integration with the YITU system has been developed allowing to receive events on face recognition in the Intellect Event Viewer 

Video surveillance

  1. Optimized the Intellect operation on dual-processor systems with a large number of video channels. Added the UseNuma=3 registry key which allows you to get optimal performance for such systems.
  2. Added automatic and semi-automatic Tag&Track modes
  3. Temperature readings from the thermal camera are now included in Event Viewer, and target individuals' faces are highlighted with a bounding box
  4. Updated the Screen Manager: added an option to copy a layout onto any Monitor permitted for a particular PC  
  5. Added a setting to the Tweaki.exe advanced setup utility to allow incremental increase of the video surveillance window size on the layout with the same-size tiles by double-clicking the left mouse button (similar to the LayoutGradualIncrease key) 
  6. Added the ability to use digital zoom in the Video Surveillance Monitor for PTZ cameras 
  7. Added the default layout selection and the UseDefaultLayoutOnlyAtStartup registry key, which allows you to configure the display of the default layout — always or only when Intellect is launched
  8. Added a new scrollable camera selection dialog to the Surveillance window
  9. When you select video cameras for the Monitor, you can now connect them to the VMDA metadata storage

Archive

  1. Added the ability to hide Backup archive and Video Gateway archive 
  2. The encoder allowing archive recording with MPEG4 codec has been implemented 
  3. Added an option to automatically create a bookmark for a protected archive 
  4. Added the ability to broadcast records from the Backup archive via an RTSP server 
  5. Added Store no more than setting to specify the period for storing records in the Backup archive 
  6. Detection tool frames (bounding boxes) are now displayed in the archive and in the Operator Protocol  

Detection tools

  1. Updated the VMDA detection: improved the accuracy and stability
  2. The Show actual video aspect ratio parameter is now applicable for all Tracker object settings.
  3. Changed the licensing principle of Smart Archive Search: each search channel is now licensed separately  

Map

  1. Added an option to use external maps (OpenStreetMaps) as a substrate for the Map layer 
  2. You can now easier lock the Map to location coordinates, and use this locking in mobile applications 
  3. The map can now be pinned on top of all windows.

Export

  1. Added the ability to put captions with the camera name, date and time on the video image exported with the AviExport background export utility 
  2. Implemented the function of masking (hiding) an area  
  3. When exporting to an exe file, the selection of any container types other than AVI was prohibited in the AviExport utility 
  4. Supported the video export with sound in mp4 format with recompression and in the original format using the AviExport utility
  5. Added camera search and sort by ID and name in AviExport utility

Audio

  1. You can now add a group of microphones to the Audio Player 
  2. Voice notification is disabled by default in Audio Player 
  3. Supported the audio stream parameters in the microphone settings
  4. You can now stop playing a file in the Voice Notification Service and the Audio Player
  5. If the screen with the Audio Player is hidden on any of the computers, the command to start listening on this computer is not executed

SIP hardware

SIP-terminal improvements 

  1. Calls from Server/RAW to Client via SIP-terminal are supported.
  2. Added call forwarding.
  3. Added the of group calls that can be answered by SIP-operators or SIP-devices from a predefined list.
  4. Added the ability to select SIP operators that can work with the SIP-panel.
  5. Added the ability to add SIP-operator objects to the map.
  6. Added the ability to create separate address books to be selected on a separate tab on the SIP-panel.
  7. Supported the BasIp devices operation using HTTP requests.
  8. Added a setting to forbid/allow calls to unknown subscribers who are not in the address book of the SIP-panel.

SIP-panel improvements: 

  1. Significantly redesigned and improved the SIP-panel interface.
  2. SIP-panel interface elements settings are implemented to hide dial pad, header, archive and call control buttons.
  3. Added an option to activate the screen with the SIP-panel during a call.
  4. Added a call log with the ability to view video and/or audio archive of calls (depending on the camera availability).
  5. Added an option to hold / unhold a call from the Map.
  6. During an active call, or a call on hold, the answer window is now displayed on top of other windows.
  7. Added key tone and dial tone options for the SIP-panel.
  8. Added display of current call duration on SIP-panel.

Registry keys: 

  1. Added the UseFfmpegConcat registry key to merge archive fragments with different resolution at background export with the AviExport utility.
  2. Added the "blocking" registry key which prevents the video image from digital zooming.
  3. Added the StopLiveStreamInArchive registry key that allows you to disable requests for live video streams when you switch to Archive mode.
  4. Added the MonitorExtraTextColor registry key setting the fixed color for additional information text, regardless of the camera state.
  5. HideArchControls registry key added to disable the archive playback controls in CamMonitor.ocx ActiveX.
  6. Added the cur_monitor registry key for selecting the monitor to display the Intellect settings panel.
  7. Added the HideMaskFaces registry key which allows you to hide the face masking setting in the AviExport utility.
  8. Added restorezoom registry key to automatically disable digital zoom after a specified time.
  9. Added the DrawAngleArrow registry key to disable the direction arrow when displaying the frame of VMDA detectors on the video image.
  10. Added the live_time registry key to set the display time of the VMDA detectors frame on the video image.
  11. Added hide_image_preview registry key to disable viewing the enlarged alarm frame in the Operator Protocol.
  12. Added the Monitor.ShowTimeMS registry key which allows to enable/disable displaying the milliseconds in the monitor. By default, the milliseconds are displayed.
  13. Added the LayoutGradualIncrease registry key that lets you gradually increase the Camera Window on a layout with same-size cells by double clicking the LMB.
  14. Added the DisableAntiAliasingForArchiveVideo registry key to disable anti-aliasing when playing the archive.
  15. Added the WM_LBUTTONDBLCLK and WM_RBUTTONDBLCLK registry keys which allows you to prevent double clicks with left and right mouse buttons in the Monitor.
  16. The UseServerTime registry key now applies to the audio stream as well.

Integration

  1. Added support for CORS Policy in HTTP API requests 
  2. Added the Bearer authorization type to HTTP API
  3. Parameters of objects coordinates on external maps were added to responses to a number of HTTP API requests 
  4. A function has been added to the HTTP API to query the user database 
  5. Added a request to the HTTP API to get a list of all objects in the configuration 
  6. Added the redirect from HTTP to HTTPS and vice versa in Web Server 2.0.
  7. For the Speaker (SPEAKER) object, added the START_PLAY_TIME reaction that allows you to start the recorded audio footage playback
  8. The ability to filter core events has been added to the IIDK interface 
  9. The speaker now can playback numbers and symbols in a tone set using the START_TONE command.
  10. Added the PLACE_CAM_IN_LAYOUT_CELL event to the monitor, which allows you to add a camera to a specific cell on the specific layout
  11. Added the ability to filter HTTP Server events by parameters 
  12. On the RTSP server it is now possible to transmit the time in the archive using the captions stream

Other

  1. Added two-factor authentication on logging into the Intellect PSIM with a SMS 
  2. Added the ability to bulk-set cameras when configuring the RTSP Server 
  3. Added the ability to set the RTSP port for IP devices if port 554 is not used  
  4. Added the ability to move a user across the user rights  
  5. Added an option to set the line thickness on the graphs 
  6. Added the ability to send SMS from Short Message Service to several numbers 
  7. Added the ability to set the region for virtual objects 
  8. A parameter was added in the advanced configuration utility tweaki.exe to set the sort order of the object tree 
  9. Added the ability to filter events in the Program object similar to script 
  10. In the Debug window, added an option to use regular expressions in event filters 

Bug Fixes

  1. Fixed freezing of the Audio Player when playing long recordings.
  2. Fixed errors in recording to the Backup archive and improved its stability.
  3. Fixed a bug with playing sound from the Backup archive.
  4. Fixed a rare bug when the Display Manager crashed when controlled from the Remote Client.
  5. Fixed a bug with rendering the frames of zone detectors on cameras with direct connection.
  6. Fixed a bug with displaying archive dates in the calendar in cases when video from cameras cannot be decompressed.
  7. Fixed a bug with applying user rights to PTZ devices.
  8. Fixed an error of the Web-server 2.0 module freezing after changing its settings.
  9. Fixed an error of the Web-server 2.0 module, when the response to a request for a map list was empty, if there were objects on the map.
  10. Fixed the 404 error of the Web-server 2.0 module, when requesting information about a layer.
  11. Fixed a bug with dynamic updating of objects in the table of map objects.
  12. Fixed an error with displaying the number of archive days in the AviExport utility.
  13. Fixed a bug with exporting video with sound when a microphone is connected to the Remote Client.
  14. Fixed a bug with video crashing when starting replication from external storage.
  15. Fixed a bug with sound absence when exporting without conversion.
  16. Fixed a bug with video crashing when sending GET_FRAME with high intensity.
  17. Fixed a bug with displaying tracks from the embedded camera tracker.
  18. Fixed errors in exporting from the AviExport utility and improved its stability.
  19. Fixed an error with authorization in the web interface of the web server.
  20. Fixed a bug with playing video in H.265 format received from ONVIF server.
  21. Fixed a bug due to which disconnected cameras were returned as a response to the configuration request from the Web-server 2.0 module.
  22. Fixed a bug due to which the SIP-panel did not respond to calls initiated by macros.
  23. Fixed a bug with permanent recording in the video gateway.
  24. Fixed memory leak when paging the layouts.
  25. Fixed a bug with frame-by-frame video playback in the reversed direction.
  26. Fixed crashing when viewing the archive on the client.
  27. Fixed an issue with audio interruption with Roxton SX-480N amplifier.
  28. Fixed a nonpermanent error with displaying the Pure Virtual Function Call message.
  29. Fixed incorrect displaying of the Remote Client status on the map.
  30. Fixed crashing when trying to play video in YUV4:2:2 352x288 format, MJPEG compressor.
  31. Fixed degradation of video quality on 4K monitor when zooming in Windows.
  32. Fixed a bug in the web server due to which the Out of memory message appeared when connecting.
  33. Fixed crashing when deleting an archive on a camera.
  34. Fixed a bug due to which the detection tool masking stopped working after arming the detection zone.
  35. Fixed a bug with exporting video from external camera storage.
  36. Fixed a bug due to which the abandoned items were not detected when working with the embedded tracker on Axis cameras.
  37. Fixed a bug with displaying a camera with ID greater than 50000.
  38. Fixed an error due to which the archive of the video gateway from the Remote Client was unavailable.
  39. Fixed an error with starting the convert.exe utility.
  40. Fixed a bug with paging layouts that were created manually.
  41. Fixed a bug with a lag in live video when viewing an archive if Intel Quick Sync was used.
  42. Fixed crashing when working with telemetry of a disconnected camera.
  43. Fixed a disconnection issue when hiding the SIP-panel.
  44. Fixed crashing when sharing a license file.
  45. Fixed a bug in the Pelco-D Serial telemetry operation.
  46. Fixed a bug with clearing a comment field after processing an event in the Operator Protocol.
  47. Fixed errors in the State statistics module due to which the incorrect number of devices in the system was displayed.
  48. Fixed memory leak of intellect.exe process.
  49. Fixed sound problem when playing a file on 6 devices or more from a SIP-terminal.
  50. Fixed crashing on the Remote Client when unloading the server if multiple interfaces were assigned to the Remote Client.
  51. Fixed a bug with exporting from the Backup archive.
  52. Fixed a bug with video decompression from FX cards when using decimation.
  53. Fixed a bug with recording sound from a microphone in cases when a user profile change was performed in Windows.
  54. Fixed a bug due to which folders were not created on the Programming tab.
  55. Fixed a bug due to which events that did not match the filter were included in the report in the event viewer.
  56. Fixed a bug due to which HTTP requests were not processed if cameras were not added to the web server.
  57. Fixed a bug with GreenStream operation when connecting directly to cameras.
  58. Fixed a bug with sending messages to Telegram using a macro.
  59. Fixed memory leak when working with video capture devices, if multiple cameras were created under them.
  60. Fixed crashing of the Video.run module when closing the sensor contacts on Stream labs 4 I/O devices.
  61. Fixed video freezing when clicking the Apply button when configuring a monitor with more than 1000 cameras added.
  62. Fixed freezing when accessing the archive for all cameras at the same time.
  63. Fixed a bug with sound playback when switching to the next-day archive.
  64. Fixed a bug with stopping fast playback when switching to the next-day archive.
  65. Fixed an issue with artifacts in the archive when receiving alarms from a motion detection tool.
  66. Fixed a bug with the captioners operation on intellect64.exe.
  67. Fixed an error with receiving events from Neopad 2 consoles.
  68. Fixed a bug due to which the default stream did not display in the monitor.
  69. Fixed a bug with receiving a frame via GET_FRAME.
  70. Fixed a bug due to which the VMDA detector frames (bounding boxes) were shown when the captions displaying was disabled.
  71. Fixed a bug in the VMDA detector due to which one alarm was generated if two objects crossed a virtual line in a row.
  72. Fixed video crashing after updating from version 4.9.9.
  73. Fixed an error with /secure/events/ and /secure/feed/ HTTP requests.
  74. Fixed an issue of incorrect displaying of the name of the user who launched the macro in the mobile client.
  75. Fixed a bug with displaying the list of Monitors in the mobile client.
  76. Fixed a bug with playing sound on Remote Client through macros.
  77. Fixed an error of receiving video from the DKS15102 intercom.
  78. Fixed a bug with incorrect filling of ONVIF server profiles.
  79. Fixed a bug with GreenStream operation in CamMonitor.
  80. Fixed a bug due to which the old archive was not completely cleared.
  81. Fixed a bug that caused loss of audio after clicking Apply on the sound card.
  82. Fixed a bug that led to short-term loss of audio between the recordings during video playback in the archive.
  83. Fixed an error of requesting the administrator password when logging off Intellect.
  84. Fixed an error with analog telemetry operation via COM port.
  85. Fixed a bug in the Maximum lines to show parameter in the AviExport utility.
  86. Fixed a bug with recording the archive when using WS-216 cards.
  87. Fixed a bug due to which the restriction of rights for various interfaces did not work.
  88. Fixed an error with running a 64-bit slave.exe.
  89. Fixed a bug with simultaneous crash of intellect.exe and Video.run when logging off Intellect.
  90. Fixed bugs and optimized archive playback for several cameras simultaneously.
  91. Fixed an error with receiving frames (bounding boxes) and events from the ONVIF server tracker when working with the embedded onvif_events detection tool.
  92. Fixed the problem of high-pitched microphone sound when working with ITV and FFMPEG grabbers.
  93. Fixed an error of displaying the chart on the Retrospective tab in the State statistics module.
  94. Fixed a bug due to which the video in the archive continued to play for several seconds after releasing a keyboard key.
  95. Fixed a bug with video surveillance windows rendering if more than 100 cameras were displayed on the Monitor.
  96. Fixed a bug due to which the time indication disappeared in the Surveillance window after switching to the archive.
  • No labels