Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Assigning commands to joystick buttons using Registry Editor  Testing joystick functioning Next page


The default commands assigned to joystick buttons are presented in the table below:

Button

Default command

1

Optical zoom in

2

Optical zoom out

3

Focus +

4

Focus -

5

Enable auto focus

6

Not specified

7

Open diaphragm

8

Close diaphragm

9

Not specified

10

Not specified

Assign commands to joystick buttons using the Monitor as follows:

  1. Go to the Interfaces tab (1).


  2. Go to settings panel of the Monitor object which is in use to display video from the camera to which the PTZ device is assigned (2).
  3. Go to the PTZ tab (3).
  4. Joystick buttons are listed in the Joysctick buttons column (4). Buttons numeration depends on the joystick model and is described in the reference documentation.
  5. In the Action dropdown list, select a reaction of the PTZ device object next to the required button. This reaction will be performed when clicking the button (5).
  6. In case of the selected reaction requires specifying the parameter, e.g. preset number or speed, specify the value of this parameter in the Parameter field (6).
  7.  To save changes, click the Apply button (7).

Note.

Settings of the Monitor from which controlling is performed are in use if different actions are assigned to one button in several Monitors.

Joystick buttons are now configured.

  • No labels