Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Audio subsystem configuration  Creating and configuring the Microphone object Next page


Create and configure the Audio card object as follows:

  1. Go to the Hardware tab in the System settings dialog box (1).
  2. Select Create object -> Audio card in the context menu of the Computer object (2).

    As a result, the basic settings toolbar is displayed.

    Note

    Basic settings are set automatically. It is possible to change an ID, object name and parent object.

  3. To create the object, click the Apply button.
  4. Select the created Audio card object in the object tree (1).
  5. Configure the created object.

    1. In the Board list (2) specify the type and PCI channel of the card. Between the Audio cards objects there is end-to-end allocation of PCI channels that starts with ‘0’.

    2. In the Sample rate list, select the audio sample rate (3).

      Important!

      If audio is received from IP device, then the value selected in the Digitization dropdown list is ignored. In this case the digitization rate is set in the driver parameters on the Microphone settings panel (see Configuring audio acquisition from IP devices).

      Note

      Sample rate for SC510N4 (FX HD4, SA 7160PCI) card (specified in the Sample rate list) is to be the same as the sample rate on the video camera. If rate values are not the same then slow-/fast-motion is possible.

    3. Click the Apply button to save the changes.

  6. Configuring the Audio card object is completed.

Attention!

To configure one physical video capture card the creation of several Audio card objects is required (see Features of audio subsystem configuration section).