Go to documentation repository
Features of audio subsystem configuration are given in the table below:
Video capture device | Number of the Audio card objects for one physical card | Maximum number of the Microphone objects for one Audio card object | Allocation of channel numbers between the Microphone objects under one Audio card object |
FS5 (FS 6) | 1 | 2 | #0 - #1 |
FS6 (FS 6) | 4 | 2 | #0 - #1 |
FS16 (FS 6) | 4 | 2 | #0 - #1 |
FS8 (FS 8) | 8 | 2 | #0 - #1 |
FX2 (FS 6) | 2 | 2 | #0 - #1 |
SC200Q4 (FS15, TW6802 PCI, Analog Waveln) | 1 | 1 | only #0 |
SC200Q4 Low profile (FS115) | 1 | 1 | only #0 |
| SC230N4 | 4 | 1 | only #0 |
SC300Q16 (FX4, TW6802 PCI, Analog Waveln) | 4 | 1 | only #0 |
SC300D16 (FX8, TW6802 PCI, Analog Waveln)*** | 8 | 1 | only #0 |
SC310N16 (FX16, CX2581 PCI, Analog Waveln) | 16 | 1 | only #0 |
WS7 (WS 7) | 4 | 2 | #0 - #1 |
SC390N16 (WS16, AH8400 PCI, Analog Waveln) | 16 | 1 | only #0 |
WS17 (WS 7) | 4 | 2 | #0 - #1 |
SC3B0N16 (WS216, TW5864 PCI, Analog Waveln) | 16 | 1 | only #0 |
SL16-200 (FX116, SLFXR) | 1 | 16 | #0 - #15 |
FX416 (SLFXR) | 1 | 16 | #0 - #15 |
| MS416(SLMSR) | 1 | 32 | #0 - #31 |
SC510N4 (FX HD4, SA7160 PCI, Analog Waveln)* | 4 | 1 | only #0 |
| SC590N4** | 4 | 1 | #0 - #1 |
| SC330Q16 | 4 | 1 | only #0 |
| SC330D16 | 8 | 1 | only #0 |
| SC3C0N8-L | 8 | 1 | only #1 |
* PCI channels are to be allocated between the Audio card objects created for SC510N4 (FX HD4) video capture card, taking into account the numbers of external HDMI connectors indicated on the card.
** Audio input is performed via both SDI connectors and analog inputs. Either SDI or analog input can be used at the same time for each card. #0 channel corresponds to the SDI, and #1 – to the analog input. Therefore, it is possible to simultaneously connect audio to the card via either 4 SDIs, or 3 SDIs and one analog input, or 2 SDIs and 2 analog inputs.
Restart the Axxon PSIM to apply settings.
*** FS8 video capture card allows capturing 16 audio channels with digitization quality up to 32 kHz. Eight right (#1) channels are used to connect to external DB9-M connector.
Pinout of an audio port of FS8 card:
Eight left (#0) channels are used to connect to internal 6-pin connector using 8-channel audio cable. FS8 card with an audio cable:
Pinout of an audio port of an audio cable:
Optionally there is an adapter for DB9-M connector (adio input port on FS8 card) with 8 RCA-F connectors that make audio source connection easier.
Attention!
Signs on audio cable connectors do not conform with numbers of card channels. Right channels are performed in DB9 connector, left channels are performed in DB9 cable.
Channels in DB9 connector:
Sign on audio cable connector | Number of a card channel |
1R | 1R |
2R | 3R |
3R | 5R |
4R | 7R |
1L | 2R |
2L | 4R |
3L | 6R |
4L | 8R |
Channels in DB9 cable:
Sign on audio cable connector | Number of a card channel |
1R | 1L |
2R | 3L |
3R | 5L |
4R | 7L |
1L | 2L |
2L | 4L |
3L | 6L |
4L | 8L |
Note.
WS6 card is not supported.
Overview
Content Tools