Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Advanced settings of the SIP-panel interface object  Configuration of users and permissions Next page


On the Operator settings tab, you can specify a default operator and a list of operators who can work with this SIP-panel.

Operator settings of the SIP-panel are configured as follows:

  1. Go to the Operator settings tab of the SIP-panel object.

  2. In the Operators table (1), select the required SIP-operators who can work with this SIP-panel:

    Note

    To add new lines to the table, use the Down key on your keyboard. To delete a line, use the Ctrl+Del key combination.

    1. To add all SIP-operators, click the All button (2).

    2. To add several SIP-operators, click the Range button (3). This will open the Add operators window.

      1. Select the required SIP-operators from the left list (1) and use the buttons (2) to move them to the right list (3).

      2. Click the Apply changes and close button (4).

  3. From the Default drop-down list (4) select the default SIP-operator:

    1. Select on start − when you first start the SIP-panel, it is necessary to select the appropriate SIP-operator in the authorization window. Next time, you will be logged in under the previously selected SIP-operator.

    2. User rights − the SIP-panel will be logged in under the SIP-operator that is linked to the Axxon PSIM user rights. There should be the registration in Axxon PSIM with the rights of the corresponding user.

    3. SIP operator from the list − the SIP panel will be logged in under the selected SIP-operator.

      Note

      Selecting a SIP-operator from the list is available if the display is enabled for only one computer of the video surveillance system (see Assigning the displays to the operator workstations).

  4. Click the Apply button (5).

Operator settings of the SIP-panel are now configured.

  • No labels