Documentation for ACFA PSIM 1.3.

Previous page Configuration of matching Paradox access levels and ACFA PSIM access levels  Working with the Paradox integration module Next page

The Paradox access template is configured in the settings panel of the Paradox Access Template object. This object is created on the basis of the Paradox FSA/ACS object on the Hardware tab of the System settings window.

To configure the Paradox access template, do the following:

  1. Go to the settings panel of the Paradox Access Template.
  2. From the Type drop-down list select the card type: Regular (default), Master, or Full Master.
  3. Set the Duress checkbox for disarming under duress.
  4. Set the Bypass access checkbox for bypassing of certain zones during arming. If a zone is bypassed, it will be ignored the next time the system is armed. After the subsystem is disarmed, the bypass of zones will be disabled.
  5. Set the Arm only checkbox if user has rights only for arming, and does not have rights for disarming.
  6. Set the Stay checkbox for partial arming of perimeter or for instant arming.
  7. Set the Force checkbox to arm opened areas. If areas will be closed after arming, then they will be armed.
  8. From the Follows drop-down list select the sequence of actions: Code → Keypad, or Keypad → Code.
  9. Set the Card for access checkbox if the card is used for access.
  10. Set the Extended delay card checkbox to use extended unlock delay on access.
  11. From the Arm with card drop-down list select the way of arming by card: Disabled (default), Regular, Stay, or Force.
  12. Set the Add Tolerance Window checkbox to add an additional window to the schedule.
  13. Set the Code follows Schedule checkbox if access code can be only entered within schedule.
  14. From the Card Access drop-down list select the action that will be performed upon card presenting: Unlocks only if disarmed and can't disarm, Unlocks all the time and Disarms, or Unlocks all the time and need code to disarm.
  15. From the Remote Button template drop-down list select the number of the corresponding access template.
  16. Click Apply to save the changes.

Configuration of the Paradox access template is completed.

  • No labels