Managing a HoneyWell WinPak entrance

In order to manage a HoneyWell WinPak entrance, go to the Map window and open the functional menu of the relevant WinPak Entrance object.

The commands of the functional menu are described in the table.

Command	Description
De-Energize	Turns off the energy supply for the entrance input.
Mode: Locked	Turns on the mode when the door is completely locked.
Mode: Card	Turns on the mode when the card is sufficient for door access.
Unshunt	Disable a delay before an alarm is raised if the door is not closed after it has been unlocked.
Mode: Disable	Completely disables the door and its controls.
Energize	Turns on the energy supply for the entrance input.
Mode: Site Code	Turns on the mode when both card and site code entry are required for door access.
Mode: Unlock	Turns on the mode when the door is completely unlocked.
Timed pulse	Enable sending pulses in time periods to the server to notify that the door is alive. The time periods are configured in ACFA PSIM.
Shunt	Enable a delay before an alarm is raised if the door is not closed after it has been unlocked.
Mode: PIN	Turn on the mode when the PIN number is sufficient for door access.
Restore TimeZone	Reset the time period durimg which the door accepts the card.
Pulse	Enable sending pulses in time periods to the server to notify that the door is alive. The time periods are configured in HoneyWell WinPack.
Mode: Card or PIN	Turns on the mode when both card access and PIN are required for door access.
Mode: Card and PIN	Turns on the mode when either card or PIN is sufficient for door access.

Page tree