Documentation for ACFA PSIM 1.3.

Previous page Hikvision SADP settings  Configuring the Hikvision door Next page

Note

The advanced settings of the Hikvision controller/terminal will be illustrated by an example of the Hikvision DS-K26x series controller. You can configure the advanced settings of other Hikvision controllers/terminals in the similar way.

Advanced settings are not available for the Hikvision KV series call panels, such as DS-KV8102-IP.

To configure the advanced settings of the Hikvision controller, do the following:

  1. Go to the Others tab on the settings panel of the Hikvision 26X object.
  2. Set the APB enabled checkbox to enable the anti-passback monitoring.
  3. From the APB Reader drop-down list, select the starting reader for the anti-passback monitoring.
  4. From the Card mode drop-down list, select the supported format of the access card: Hikvision format (default), W26 (STR). W26 (DEC). W32 (STR). W32 (DEC), Mifare, Mifare (leading zeros).
  5. Click the Apply button.

The advanced settings of the Hikvision controller/terminal are configured.

  • No labels