Managing the Peridect+ (AxACFA) parent object

You can manage the Peridect+ parent object in the Map interactive window using the function menu of the Peridect+ object.

Commands to manage the Peridect+ parent object are described in the table:

Function menu command	Function
Reboot	Reboot the Peridect+ device
Switch to Active – Master	Control all outputs. External control isn’t possible in this mode
Switch to Active – Combined/Master	Control all system components according to the specified settings, control all outputs, and control all components with external commands
Synchronize time	Write the current server time to all Peridect+ controllers
Switch to Active – Slave	Control all system components according to the specified settings. All components can only be controlled using external commands
Switch to Active – Combined/Slave	Control all system components according to the specified settings and control all outputs. When an external command is received, the parent object of the Peridect+ integration module switches to the Switch to Active – Slave mode. If after a certain time the reception of external commands stops, the parent object of the Peridect+ integration module switches to the Switch to Active – Master mode. This mode allows the system to remain operational when the software is turned off

The Peridect+ parent object can have the following states:

	Connection established
	Connection lost
	Unknown
	Active – Master
	Active – Slave
	Active – Combined/Master
	Active – Combined/Slave
	Service – Configuration
	Service – Storing data from LCP1
	Service – Storing data from LCP2
	Service – Logging input values and detector values
	Service – Logical links testing
	Invalid license

Attention!

Events that occurred after the connection to the Peridect+ parent device was broken are not recorded to the device controller after the connection is restored.

Page tree

Documentation for ACFA PSIM 1.3.