Documentation for Auto PSIM 1.0.1.

Previous page Setting up the results filtering  Configuring speed estimation by video Next page

Half-frame processing must be performed using the image interlaced scanning (the Process half frame checkbox is set). If the half-frame processing is enabled, when the next frame is received, a new frame is created and processed, consisting only of the even rows of the initial frame. By default, the LPR channel uses full resolution, and the Process half frame checkbox is cleared.

Note

Frame processing settings are specified only when using the following program modules: AUTO-Uragan, AR-Auto, AR-Railway, VT, IV.

 To set the frame processing, do the following:

  1. Go to the settings panel of the LPR channel object, corresponding to the activated module (see Activating the program module, used for identifying the plates).

  2. Set the Process half frame checkbox (1).

    Note

    It is recommended to always set the Process half frame checkbox in order to decrease the CPU load.

  3. Click the Apply button (2).

The frame processing setup is now complete.

  • No labels