Documentation for Auto PSIM 1.0.1.

Previous page Selecting the video cameras to work with the LPR channel  Setting up the detection of the LPR channel Next page

It is possible to record a video signal received from a LP recognition video camera during a predetermined time interval. If this function is enabled, the recording starts automatically when the LPR channel recognizes a LP number. 

Note

In case of heavy traffic, when subsequent LP numbers are registered in a time period less than that specified, the video signal is recorded continuously.

To enable the function of automatic video recording, do the following:

  1. Go to the settings panel of the LPR channel object, corresponding to the activated module (see Activating the software module used for identifying the plates).

  2. Set the Automatic recording checkbox (1) to enable the recording of the video upon recognizing a LP number.

  3. In the field next to the checkbox (2), specify for how many seconds the video must be recorded after LP number recognition.

    Note

    If you specify 0 seconds in this field, continuous rerording will start when the LP is recognized.

  4. Click the Apply button to save the settings (3).
  • No labels