Go to documentation repository
Documentation for Auto PSIM 1.0.1.
Previous page
Next page
The figure shows the Speed traps server object settings panel.
The following table shows the elements in the Speed traps server settings panel.
Parameter name | Field type | Description | Data type | Default value | Value range | |
|---|---|---|---|---|---|---|
1 | Camera | List | Selecting the camera to work together with the Auto-Uragan module | List of available Camera objects | Not specified | Depending on the number of available Camera objects |
2 | Speed limit | Enter the value in the field | Entering the permitted vehicle speed on the controlled area for displaying in the report concerning the recognized number. | Km/h | - | Unlimited |
3 | Alarm on speed limit | Text field | Entering the maximum allowed vehicle speed the exceeding of which leads to the alarm registration | Km/h | - | Unlimited |
Speed-trap group | ||||||
4 | Target | List | Driving direction of the vehicle to be recognized | List of available directions | Oncoming | Oncoming – vehicles driving toward the speed-trap |
Distance | List | Setting an approximate distance between the speed-trap and the vehicles to be recognized | List of available distances | Small | Small | |
Model | List | Selecting the speed-trap model | List of integrated speed-trap devices | - | Berkut | |
Type | List | Specifying the type of the speed-trap installation | List of installation paramaters of the speed-trap devices | Stationary | Stationary – the speed-trap is static | |
| Port settings group | ||||||
5 | Port | List | COM-port number | List of available COM-ports | COM1 | Depending on the system configuration |
| Speed-trap configuration group | ||||||
6 | Installation angle, * | Text field | The angle of the speed-trap installation in relation to the horizon | Degrees | Not specified | 0 - 360 |
Detection threshold, km/h | Text field | Minimum speed detectable by the speed-trap | Km/h | Not specified | Unlimited | |
7 | Address | Enter the value in the field | Set the address of speed-trap position | - | - | - |
ID | Enter the value in the field | Set the factory ID number of speed-trap device | - | - | Depends on the producer of the device | |
Certificate | Enter the value in the field | Set the number of the certificate, correspondidng to speed-trap device | Number | - | - | |
Checking valid till | Select from the listcalendar is used) | Set the date until which verification is valid | Date in format: | Current date | - | |
Overview
Content Tools