You can manage the loop device of the Unipos7000 controller integration module in the Map and Equipment Board interface objects using the function menu of the Unipos7000 loop device object. To display the menu of the Unipos7000 loop device object, right-click the required object. Commands to manage the loop device of the Unipos7000 controller integration module are described in the table:
| Menu command | Function |
|---|---|
| Disable device | Disables loop device |
| Inhibit device | Locks loop device |
| Clear device fault | Clears loop device malfunction |
| Confirm device input | Confirms change of the input indication on loop device |
The following states of the Unipos7000 loop device object of the Unipos7000 controller integration module are possible:
| Device is disabled |
| Device is inhibited |
| Device has fault |
| Device has fire indication |
| Device output is active |
| Device input is active |
| Measure error |
| Device isolator on |
| Output short |
| Output open dirty chamber |
| Input short fault indicator |
| Input open pre alarm |
| Comm error no connection |
| Heat detector |
| Smoke detector |
| Manual call point |
| Combined detector |
| Gas detector |
| Input output device |
| Sounder device |
| Arm |
| Disarm |
Overview
Content Tools