CAM_VMDA_DETECTOR

The CAM_VMDA_DETECTOR object corresponds to the VMDA detection system object.

The CAM_VMDA_DETECTOR object sends events presented in the table. Procedure is started when the corresponding event appears.

Format of events procedure for the VMDA Detection object:

OnEvent("CAM_VMDA_DETECTOR ","_id_","_event_")

Event	Description	Parameter	Parameter description
"ALARM"	Alarm.	native_type<>	To enable this parameter, set the following registry keys: VMDA.determineNoise, VMDA.determineGivenTaken, VMDA.determineHumanCar (see Registry keys reference guide). Available values: -1 – unknown object (initial state); 0 – other; 1 – human or group of people (depending on the native_value<> parameter: if 1, human; if >1, group of people); 2 – car; 3 – noise; 4 – object carried into the area; 5 – object carried out of the area.
"ALARM"	Alarm.	native_value<>	To enable this parameter, set the following registry keys: VMDA.determineNoise, VMDA.determineGivenTaken, VMDA.determineHumanCar (see Registry keys reference guide). People counter for the "human" type object. Allows determining quantity of people in the group. For other object types it is equal to -1.
"ALARM_END"	End of alarm.

Operator format to describe actions with the VMDA detection is:

DoReact("CAM_VMDA_DETECTOR","_id_","_command_");

List of commands and parameters for the CAM_VMDA_DETECTOR object is presented in the following table:

Command – command description	Parameters	Description
"ARM" – arm detection.	-	-
"DISARM" – disarm detection.	-	-

Example of using events and reactions of the VMDA Detection object:

Arm the VMDA Detection 2 while performing macro 1:

OnEvent ("MACRO","1","RUN")
{
    DoReact("CAM_VMDA_DETECTOR","2","ARM");
}

Page tree