The Settings panel of the Video Capture Device object

The settings panel of the Video Capture Device object is shown in figure.

Table describes the parameters of the Video Capture Device settings panel.

№	Parameter	Method for setting the parameter value	Description	Presented as	Default value	Range of values
1	The Identification number field	Automatically	Shows the identification number of the Video Capture Device object in the system.	Sequence of numbers	-	Depends on the number of the Video Capture Device objects in the system.
2	The Name field	Enter the value in the field	Assigns a name to the Video Capture Device object in the system.	Latin, Cyrillic letters and service characters	Video Capture Device	A line representing a sequence of any symbols (letters, digits, service characters apart from > and < symbols), not case-sensitive. Number of symbols – from 1 to 60.
3	The Disable checkbox	Is set with a checkbox	Shows the status (enabled or disabled) of the Video Capture Device object in the system.	Boolean type	-	Yes – the Video Capture Device object is disabled and is not in use. No – the Video Capture Device object is enabled and is in use.
4	The Computer dropdown list	Is selected in the list	Assigns the parent Computer object for the Video Capture Device object.	Name of the Computer objects registered in the system.	Name of the parent Computer object	Depends on the number of the Computer objects in the system.
The Basic settings group
5	The Type dropdown list	Is selected in the list	Sets the type of the Video Capture Device	Types of Video Capture Devices	Is not defined	Video capture cards (FS-3, FS-5, FS-6, FS-8, WS–4, WS-7/17, etc.). Network video hubs (WaveHub, LinuxHub) Network devices (Axis, Panasonic, etc.) Virtual
6	The PCI channel dropdown list	Is selected in the list	Assigns the PCI channel number of the video capture card’s ADC.	List of active channels available for video input.	-	From 0 to 31, depending on the number of PCI channels in the video server and the number of installed ADCs.
7	The Signal dropdown list	Is selected in the list	Sets the format of the incoming video signal.	List of video signal formats	PAL	PAL, NTSC
8	The Resolution dropdown list	Is selected in the list	Sets resolution of the video frames.	List of available video frame resolutions	Standard	Standard High. Full Specific values depend on camera model.
9	The Speed slider	Is set in the required position.	Sets the frame rate of the video stream	Permitted deviations of the total video signal frame rate transmission.	Average	Depends on possibilities of used IP-camera or video capture card. For cards with program compression: Max – maximum permitted total video signal frame rate. Average – half of the maximum permitted total video signal frame rate. Min – one third of the maximum permitted total video signal frame rate.
10	The IP field	Enter the value in the field	Sets the IP address of a network device.	IP address	-	A line presented as xxx.xxx.xxx.xxx Contains the values: 0.0.0.0 – 255.255.255.255 Depends on network settings of IP devices registered in the system. When configuring getting live video from ECHD Server the <ECHD Server address>:<camera GUID>:<external account> line is specified.
11	The Port field	Enter the value in the field	Sets the connection port of IP-device	Nonnegative integer		From 0 to 65535 Depends on net settings of IP devices
12	The Name field	Enter the value in the field	Set the user’s name for connection to the net IP-device	-	-	Depends on net settings of IP-device
13	The Password field	Enter the value in the field	Sets the password required for connection to the network device.	-	-	Depends on net settings of IP devices
14	The Activate WatchDog checkbox	Is set with a checkbox	Activate Windows OS reset, if the main modules of the Intellect video surveillance system hang up	Boolean type	-	Yes – reset of Windows OS is activated No - reset of Windows OS is not activated
15	The Use device settings checkbox	Is set with a checkbox	Allows using settings specified in Web server or another software of IP device	Boolean type	No Note. Value of checkbox depends on settings performed in the wizard while creating the Video input card* object using the* Camera discovery tool.	Yes – settings of IP device are in use. No – settings of INTELLECT™ are in use

Page tree

Documentation for Intellect 4.10.4. Documentation for other versions of Intellect is available too.