Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Configuring embedded detection  Example of setting up and using the embedded detectors on Bosch FLEXIDOME IP dynamic 7000 VR IP camera Next page


Attention!

Tracker isn't supported since DriverPack 3.76 (see Documentation Drivers Pack).

You can use analytics from AxxonSoft (Smart video detection tools) on Axis devices.

Note

This option is available for all devices based on Axis MIPS architecture (ARTPEC-4 or ARTPEC-5 processor) or ARMv7 architecture (ARTPEC-6 or ARTPEC-7 processor). The settings are given in the AxxonSoft Tracker Help.

All CPU heavy analytics and metadata generation tasks are delegated to the camera in this case reducing Server load. 

Attention!

In order to perform forensic search in the archive when using Axis devices for metadata generation, create and configure the VMDA metadata storage and Tracker objects and select the created above detection tool as metadata source for the Tracker. See also Creating and configuring the Tracker object and Creating and configuring VMDA metadata storage.

It is not necessary to create the VMDA metadata storage and Tracker objects only to receive the detection tool triggerings.

To do this, do the following:

  1. Go to the device's web interface. 
  2. Select the Setup menu (1) → Applications (2).

  3. Select the ACAP application (3) and click the Upload Package button (4).

    Note

    You can download the app from AxxonSoft website here.

  4. Go to AxxonSoft Tracker menu (1) → License (2).

  5. Select the license file (3) and click the Install button (4).

    Note

    Register a license code along with camera's MAC address on Axis website in order to get the license file.

    Contact AxxonSoft help-desk to get the license code.

  6. Go to Applications, select the installed application (1) and click the Start button (2).
  7. Add the Axis device to Intellect using the Camera discovery tool. An Embedded detection tool object corresponding to the tracker will be created on the basis of the Camera object.

  8. Configure this object in Intellect according to Configuring embedded detection.

    Note

    You can configure the tracker parameters in the Setup → Applications → AxxonSoft Tracker → Settings section of the Axis device web-interface similar to the Tracker object in Intellect (see Creating and configuring the Tracker object).

AxxonSoft Tracker is now configured to be used in Axis devices.

  • No labels