Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Configuration of the LinkSys SPA-2102 SIP-device  Configuration of the Beward DS06/DS91406M/DSN23215PS SIP-device Next page


The AxisQ7401 video server is performed the following way:

  1. Go to the Setup > System Options > Ports & Devices > I/O Ports section.
  2. Set required port name, on which the “call duplication” DBL signal from security intercom terminal is connected. On default, port 0 for the Axis Q7401.
  3. Set the type for it: input (Input) Normal State is: open circuit (open circuit state is normal –short circuit of the port is performed by call initiation).

  4. To check, assure that the port state is changed into the Active while the call button clicking on the Setup >System Options > Port & Devices > I/O Ports tab.

This contact can be in use to show automatically the camera in full screen while the call receiving.

  • No labels