Configuration of the Intercom object

The Intercom performs the following functions:

provides the interaction between the security intercom terminals and the Intellect software;
provides the coordinated functioning of devices installed on the security intercom terminals:
2.1   microphone of SIP-device;
2.2   speakers of SIP-device;
2.3   operator call button on SIP-device;
2.4   IP-video camera.

Note.

Intercom is created and configured separately for each security intercom terminal which is to be connected to the Intercom Subsystem.

To configure the Intercom, do the following:

Select the Intercom Subsystem on the Hardware tab.
Click the right mouse button on the selected Intercom and choose the Create object - > Intercom item from the context menu.
In the opened box enter the number and name of Intercom and then click Apply button.
As a result the settings panel of Intercom will display.
From the Sensor drop-down list select the Sensor object corresponding to the operator call button on SIP-device of security intercom terminals (1).
From the Camera drop-down list select the Camera object corresponding to the video camera of security intercom terminal (2).
From the Microphone drop-down list select the Microphone object corresponding to the microphone on SIP-device of security intercom terminals.
From the Commutable output line adapter drop-down list select the Microphone object corresponding to the virtual microphone – mixer of audio streams of SIP-device (see the Configuration of the SIP-device audio subsystem in the Intellect software section) - 4).
If confirmation by operator is required to initiate connection and start communication session when sensor is closed on the intercom device, set the Do not accept automatically checkbox (5).
To save changes click Apply button (6).
Repeat steps 1-9 for all required security intercom terminals.

Configuration of the Intercom is completed.

Page tree