Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Creating the Incident manager object  Configuring the main parameters of the Incident manager Next page


To configure the Incident manager position on the screen, do the following:

  1. Go to the settings panel of the Incident manager object.
  2. Set the window coordinates in one of the following ways:
     
    1. Manually:
      1. Enter the coordinates of the upper left corner: X field (horizontal offset from the left border of the screen) and Y field (vertical offset from the upper border of the screen). Coordinates are expressed as a percentage of the horizontal and vertical screen sizes, respectively (1).
      2. Specify the window dimensions: W field (window width) and H field (window height). Dimensions are expressed as a percentage of the horizontal and vertical screen sizes, respectively (2).
    2. Using a test window:
      1. Click the X button (3).
      2. Place the opened Specify dimensions test window where the Incident manager window should be displayed.
      3. Click the OK button. As a result, the coordinates in the X, Y, W, H fields will be set in accordance with the size and position of the test window.
  3. Set the Allow moving checkbox to manually change the position and size of the Incident manager (4).
  4. From the Monitor drop-down list, select the number of the monitor in the system for which these coordinates are set and on which the Incident manager should be displayed (5).
  5. Click the Apply button.

Configuring the Incident manager position on the screen is now complete.

  • No labels