Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Creating the Operator protocol object  Setting up the event filter for the Operator protocol Next page


To configure the Operator protocol object position, do the following on the settings panel of the object:
  1. Set the Operator protocol interface box coordinates in one of the following ways.

    1. Manually:
      1. Set the X (horizontally indented from screen’s left border) and Y (vertically indented from screen’s upper border) coordinates of the upper left corner of the Operator protocol interface box. Coordinates are set as a percentage of the corresponding screen dimensions horizontally and vertically as follows (1).  
      2. Set the dimensions of the Operator protocol interface box: window’s width «W» and window’s height «H». Dimensions are set as a percentage of the corresponding screen dimensions horizontally and vertically as follows (2). 
    2. With a test window:
      1. Click X (3).
      2. Position the Set dimensions test window where the Operator protocol window should be displayed.
      3. Click OK. As a result, the coordinates in the fields X, Y, W, H will be set in accordance with the size and position of the test window.
  2. Set the Allow moving checkbox if the position and size of the Operator protocol interface box are to be changed manually (4). 
  3. In the Monitor dropdown list select the the system ID of a monitor for which the coordinates are set and on which the Operator protocol  interface box is to be displayed (5). 
  4. Click Apply (6).

The Operator protocol object position is now configured.

  • No labels