Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Switching between layers of the Map  Operations with microphones Next page


On the page:




Camera status indication

The camera icon on the Map depends on the type of camera: PTZ camera or regular camera. The camera icons on the Map are shown in the figure:

Regular camera

 

PTZ camera

The camera status is indicated through different colours and intermittent blinking of the given camera symbol on the Map.

Note

If camera performs recording, then the camera icon is marked with REC: or .

Camera operations

The camera is operated via the function menu of the given camera symbol shown on the Map.

You can access the function menu of the camera by right-clicking the corresponding camera symbol.

The function menu of the camera provides access to various operating functions of the camera.

Item of the function menu

Function

Comments

Camera No./Connection

Displays the identifier of the selected camera, as well as the date and time of the first connection of the camera


Stop recording

Stops recording

See Stopping the recording

Video out

Outputs the camera image to the analogue monitor connected to the system

See Video surveillance using an analog monitor

Arm

Arms the camera in the main detection zone

See Camera arming and disarming

Start recording

Starts recording on Operator's command

See Recording by Operator command

Sip disconnected

Disconnection of a Sip device

See Intercom Subsystem Reference and Information Guide

Disarm

Disarms the camera in the main detection zone

See Camera arming and disarming

Sip connectedConnection of a Sip device

See Intercom Subsystem Reference and Information Guide 

Request frame

Sends the GET_FRAME reaction to the system without the path<> parameter. As a result, the FRAME_SENT event is generated with the data<> parameter. Please see the details on how to process this event in The SaveToFile method section of the Programming Guide (JScript).

Note. This function will not work for a virtual camera playing video in avi format.

Note

The Start video export and Stop video export menu items cannot be used on the Map, because the reactions corresponding to them need extra settings. You can use these reactions using macros and scripts (see Administrator's Guide).

Displaying camera on Video surveillance monitor when selected on Map

If Video surveillance monitor in Active camera mode was configured at system setup (see Configuring the display mode of camera windows), then video from a camera is displayed on such a Video surveillance monitor when you select the camera icon on the Map.