Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Configuring the Charts to display analog sensor readings  Configuring the chart display Next page


Set the Charts window position on the screen as follows:

  1. Go to the Charts object settings panel.
  2. There are two options to sen the window coordinates:
    1. Manually:
      1. Set the interface window top left corner coordinates as a percentage of the screen size in the X and Y fields (1).
      2. Set the interface window width and height as a percentage of the screen size in the W and H fields (2).
      3. Select physical monitor of the computer to display interface window from the Monitor drop-down list (3). The monitors are numbered as they are positioned physically from the left to the right and from the top to the bottom regardless the numbering in the operating system.
    2. With a sample box:
      1. Click the X button (4).
      2. The Specify dimensions sample box opens:
      3. Drag the Specify dimensions box to the position where the Charts interface window should be and stretch to desired size.
      4. Click OK to confirm.
      5. The X, Y, W, H and Monitor fields are filled automatically according to the position set.
  3. If an Operator should be able to move the Charts window on the screen, set the Allow moving checkbox (5).
  4. Click Apply to save settings.

Setting the Charts window position on the screen is now complete.

  • No labels