Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.

Previous page Audio signals sample rate settings  Setting up the Automatic Gain Control for sound cards of Olha line Next page


It is possible to amplify incoming audio signals with the help of software.

Note.

 If the signal power varies during the audio session, it is necessary to increase the audio signal power by a constant value and to use Automatic Gain Control (AGC).

To amplify audio signal do the following:

  1. Go to the Settings panel of the Microphone system object.
  2. Feed the audio signal with to the microphone. Power level of incoming signal will be displayed on the indicator Level (1).
  3. When necessary set the slider Volume to the position, corresponding to the required value of amplification (2).The current value in dB is shown in the right field next to the slider.
  4. Repeat steps 2 and 3 for the required power level of audio signal.
  5. Press Apply button to save all the changes (3).

Set of audio signal volume amplification is completed.

  • No labels