The Settings panel of the PS-RTP server object

Attention!

The PS-RTP Server object was excluded from Intellect since the version 4.11.3.

The settings panel of the PS-RTP Server object is shown in the figures.

The Main tab.

The List of devices tab.

The Connection to external server tab.

The table describes the setting parameters of the PS-RTP Server system object.

№	Parameter	Method of setting the parameter value	Parameter description	Representation	Default value	Value range
1	Identification number	Automatically	Displays the identification number of the PS-RTP Server object in the system	Sequence of numbers	-	Depends on the number of the PS-RTP Server objects in the system
2	Name	Enter the value into the field	Sets the name of the PS-RTP Server object	Latin, Cyrillic and service characters	PS-RTP Server	A line containing a sequence of any characters (letters, digits, service characters except for the > and < characters), case-insensitive. Number of characters—from 1 to 60
3	Disable	Set the checkbox	Sets the state (disabled or enabled) of the PS-RTP Server object	Boolean type	Clear	Set—the PS-RTP Server object is disabled and isn't used Clear—the PS-RTP Server object is enabled and used
4	Computer	Select the value from the list	Sets the Computer parent object of the digital system with the distributed architecture to which the given PS-RTP Server object belongs	Names of the Computer objects registered in the system	The name of the Computer parent object	Depends on the number of the Computer objects in the digital video surveillance system with the distributed architecture
The Main tab
5	IP	Select the value from the list	Sets the IP address of the network interface using which the third-party software will control the devices registered in Intellect via the GB28181 protocol	IP address	Depends on the parameters of the network connection	Depends on the parameters and the number of the network connections
6	Port	Enter the value into the field	Number of the port through which the third-party software will be connected via the GB28181 protocol	Sequence of numbers	5060	0–65535
7	Transport	Select the value from the list	Transport protocol for the data transmission	Supported transport protocols	UDP	UDP, TCP
8	from	Enter the value into the field	Lower limit of the RTP port range	Sequence of numbers	-	0–65535
9	to	Enter the value into the field	Upper limit of the RTP port range	Sequence of numbers	-	0–65535
10	Server ID	Automatically	The identifier of the Intellect Server that is used by the third-party software to connect to the RS-RTP Server via the GB28181 protocol	-	-	-
The List of devices tab
11	Type	Select the value from the list	The type of object to be controlled via the GB28181 protocol	Names of the types of objects in Intellect objects tree	-	Depends on the number of the objects created in Intellect objects tree
12	Name	Select the value from the list	The name of the object to be controlled via the GB28181 protocol	Names of the objects in Intellect objects tree	-	Depends on the number of the objects created in Intellect objects tree
13	Device ID	Automatically	The identifier of the device that will be used in the third-party software to control objects via the GB28181 protocol	-	-	-
The Connection to external server tab
14	External server connection	Set the checkbox	Defines if Intellect connects to the external supserver using the PS-RTP Server object via the GB28181 protocol	Boolean type	Clear	Set—the external server connection is enabled Clear—the external server connection is disabled
15	IP	Enter the value into the field	IP address of the supserver	IP address	-	000.000.000.000 – 255.255.255.255
16	Port	Enter the value into the field	Port used to connect to the external server	Sequence of numbers	5060	0–65535
17	Transport	Select the value from the list	Transport protocol used to connect to the external server	Supported transport protocols	-	TCP, UPD
18	Password	Enter the value into the field	Password used to connect to the external server	Latin, Cyrillic and service characters	-	A line containing a sequence of any characters
19	Login	Enter the value into the field	Username used to connect to the external server	Latin, Cyrillic and service characters	-	A line containing a sequence of any characters
20	Server ID	Enter the value into the field	The identifier of the supserver via the GB28181 protocol	Sequence of numbers	-	00000000000000000000 – 99999999999999999999

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.