The Settings panel of the Telemetry control panel object

The Telemetry control panel object is used to register and configure the Universal PTZ control panel interface object in Intellect. The Universal PTZ control panel interface object is used to control the PTZ devices.

The settings panel of the Telemetry control panel object is shown in the figure.

Table describes the setting parameters corresponding to the elements of the settings panel of the Telemetry control panel object.

№	Parameter	Method for setting the parameter value	Parameter description	Representation	Default value	Value range
1	Identification number*	Automatically	Displays the identification number of the Telemetry control panel object in the system	Numbers, letters, periods, hyphen, dash and underscore	-	Depends on the number of the Telemetry control panel objects in the system
2	Name*	Enter the value into the field	Sets the name of the Telemetry control panel object in the system	Latin, Cyrillic and service characters	Telemetry control panel	A line containing a sequence of any characters (letters, digits, service characters except > and < characters), case-insensitive. Number of characters—from 1 to 60
3	Disable	Set the checkbox	Sets the state of the Telemetry control panel object in the digital video surveillance system with distributed architecture	Boolean type	Clear	Set—the Telemetry control panel object is disabled and isn't used Clear—the Telemetry control panel object is enabled and used
4	Display	Select the value from the list	Sets the Display parent object in the digital system with distributed architecture to which the given Telemetry control panel object belongs	Names of the Display objects registered in the system	Name of the Display parent object.	Depends on the number of the Display objects in the system
The Output window group
5	Monitor	Select the value from the list	Sets the number of the monitor for which the coordinates are set	Number of the monitor in OS	1	1-16
6	X	Enter the value into the field	Sets the X coordinate in the horizontal axis for the upper left corner of the Telemetry control panel on the screen	% of the screen width	30	From 0 to M*100, where M is the number of the installed monitors
7	W	Enter the value into the field	Sets the width of the Telemetry control panel interface window	% of the screen width	-	From 18 to M*100, where M is the number of the installed monitors
8	Y	Enter the value into the field	Sets the Y coordinate in the vertical axis for the upper left corner of the Telemetry control panel on the screen	% of the screen height	30	From 0 to M*100, where M is the number of the installed monitors
9	H	Enter the value into the field	Sets the height of the Telemetry control panel interface window	% of the screen height	-	From 34 to M*100, where M is the number of the installed monitors
10	Current coordinates*	Click the button	Sets the current coordinates of the Telemetry control panel in the X, Y, W and H fields	-	-	-
11	Allow window moving	Set the checkbox	Allows moving the Telemetry control panel using the mouse	Boolean type	Set	Set—allow moving the Telemetry control panel Clear—disable moving the Telemetry control panel
12	Half-transparent window	Set the checkbox	Displays the half-transparent Telemetry control panel	Boolean type	Set	Set—display the half-transparent Telemetry control panel Clear—do not display the half-transparent Telemetry control panel
13	Priority	Select the value from the list	Sets the priority of the PTZ devices control	Names of the priorities to control the PTZ devices	Low priority	Forbidden—control of the PTZ device using the Telemetry control panel is forbidden Low priority—control of the PTZ device using the Telemetry control panel is performed after it controls the devices with Normal or High priority Normal priority—control of the PTZ device using the Telemetry control panel is performed after it controls devices with High priority High priority—control of the PTZ device using the Telemetry control panel is performed in the first place
14	Allow presets	Set the checkbox	Allows saving the position of the PTZ device in the presets	Boolean type	Set	Set—allow saving the position of the PTZ device in the presets Clear—disable saving the position of the PTZ device in the presets
15	Allow hotkeys	Set the checkbox	Enables the PTZ device control using the keyboard	Boolean type	Clear	Set—keyboard can be used to control the PTZ device Clear—keyboard hotkeys cannot be used to control the PTZ device
16	Available cameras with telemetry control	Automatically	Displays the video cameras with the PTZ devices	Names of the Camera objects registered in the system	List of all Camera objects registered in the system	Depends on the number of the PTZ devices in the digital system with distributed architecture
17	Selected cameras	Select by clicking the arrow keys	Sets the video cameras with the PTZ devices that can be controlled using the Telemetry control panel	-	-	Depends on the number of the PTZ devices in the digital system with distributed architecture
18	One to the right*	Click the button	Moves the selected PTZ device from the Available cameras with telemetry control list to the Selected cameras list	-	-	-
19	One to the left*	Click the button	Moves the selected PTZ device from the Selected cameras list to the Available cameras with telemetry control list	-	-	-
20	All to the right*	Click the button	Moves all PTZ devices from the Available cameras with telemetry control list to the Selected cameras list	-	-	-
21	All to the left*	Click the button	Moves all PTZ devices from the Selected cameras list to the Available cameras with telemetry control list	-	-	-

*Name of the element isn't displayed in the settings panel of the given object.

Page tree

Documentation for Intellect 4.11.0-4.11.3. Documentation for other versions of Intellect is available too.