The Settings panel of the Testing video capture cards section

The Testing video capture cards section is designed to test the connection of the cameras to the video capture card.

Note.

To use this functionality Intellect is to be logged off. Otherwise there is “Cards not found” message.

The settings panel for the Testing video capture cards section is shown in the figure.

The parameters of the settings panel are described in the table.

No	Parameter name		Field type	Description	Representation	Default value	Value range
1	The Board dropdown list		Dropdown list	Specifies the video capture card which camera connections are to be checked	List of video capture cards	-	Depends on the number of installed video capture cards
2		The Test button	Click the button	Starts the testing process of the video capture card. The Intellect system is to be closed at the time of testing.	-	-	-
The Channels state table
3	The Channel column		Automatically	Displays the channels numbers of the selected video capture card	-	-	From 1 to 16
4	The State column		Automatically	Displays the state of camera connections to the channels of the selected video capture cards			Attach – camera is attached Detach – camera is detached

Page tree