Configuration of the GAI - Tronics HelpPoint SIP-device

The “GAI-Tronics HelpPoint” SIP-device is configured through the Web-interface the following way:

Change IP-address of SIP-device on the “IP Settings” tab if it’s needed;

Specify parameters of SIP protocol on the “SIP Settings” tab.

№	Parameter	Parameter value	Information
1	LOCALID	Sequence of symbols (letters, digits etc.)	User ID for connecting to the SIP-device
2	PROXY	Empty field	Proxy-server is not in use	Call from the SIP-device readdresses directly to the Intercom Subsystem Server
3	REGISTRAR	Empty field	Readdress Server is not in use
4	USERNAME	Sequence of symbols (letters, digits etc.)	User name of SIP-device. Should coincide with “LOCALID” parameter value
5	PASSWORD	Sequence of symbols (letters, digits etc.)	Password to connect to the SIP-device
6	ENDPOINT	ENABLED	SIP-device activated

Add the Intercom Subsystem Server of security intercom terminals to the contact list of SIP-device on page 1 «Memories & Comfort Strings» of the «Dialing & Memories» tab.

№

Parameter

Parameter value

Information

1

MEMORY

sip:<name>@<IP address>

SIP URL consists of two parts:

<name> -user name. It is ignored while calling

<IP address> - IP-address of Intercom Subsystem Server

2

COMFORT

Sequence of numbers

Use to configure calls addressing from SIP-device (see step 4)

Set the call direction while clicking the call button on page 2 «Memory Lists» of the «Dialing & Memories» tab.

№	Parameter	Parameter value	Information
1	Number	Sequence of numbers	Number of required call button
2	WAKEANDIAL	ON	Includes the call addressing to the Intercom Subsystem Server while clicking the required button
3	LIST	Sequence of numbers	Should coincide with “COMFORT” parameter value, corresponding to the SIP URL of required Intercom Subsystem Server (see step 3).

Configuring of the «GAI-Tronics HelpPoint» SIP-device through the Web-interface is completed.

Page tree

Documentation for Axxon PSIM 1.0.0-1.0.1.