Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Configuration of the GAI - Tronics HelpPoint SIP-device  Configuration of the AxisQ7401 video server Next page


The “LinkSys SPA-2102” SIP-device is configured through the Web-interface the following way:

  1. The configuration is performed with connected SIP-device through the Ethernet port. Change IP-address of SIP-device on the Wan Setup tab if it’s needed and allow its administrating from outside (Enable WAN web server – yes, disabled on default).

  2. It is recommended to switch the internal “Ethernet” port of SIP-device which is in use to connect video server to the “Bridge” mode on the LAN Setup tab. The device administrating through this port is available only through the “Internet” port. To define the current IP address on the internal device port, connect the telephone to the Line1 port, listen to the voice answer and enter ****, then 210 and # in the tonal mode. To define the external IP address enter **** 110 #.

  3. Set parameters of the SIP protocol on the Line1 tab.

Configuring of the LinkSys SPA-2102 SIP-device through the Web-interface is completed.

  • No labels