Go to documentation repository
Go to the RTSP Server and Web server objects setting panels to enable and configure NAT (see Configuring the RTSP Server module and Enabling the processing of SDC (ECHD) requests and selecting the RTSP server).
For example, the following NAT parameters are specified on the settings panel of the RTSP Server object:
10.0.12.139—router IP address.
1001—router port.
192.168.0.109—server address in local network.
559—RTSP Server port.
80—Web server port.
General request format:
GET http://IP address:port/getliveurl?cameraid={cameraid}
Request parameters:
Parameter | Required | Description |
|---|---|---|
| cameraid | Yes | Camera ID |
Request example:
GET http://127.0.0.1:80/getliveurl?cameraid=1Response example:
If the Use NAT address checkbox is clear on the settings panel of the Web server object:
{
"rtspurl": "rtsp://127.0.0.1:559/archive?id=1"
}
If the Use NAT address checkbox is set on the settings panel of the Web server object:
{
"rtspurl": "rtsp://10.0.12.139:1001/archive?id=1"
}
Response parameters:
Parameter | Description |
|---|---|
| id | Camera ID |
Overview
Content Tools