Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Features of Samsung SSC-2000 control panel configuration and operation  Features of Samsung SPC-7000 control panel configuration Next page


Configure EverFocus EKB200 telemetry control panel in Axxon PSIM as follows:

  1. Create the Telemetry Controller object.

    Note.

    You can leave default settings of the Telemetry Controller object.

  2. Create the Control panel object.

  3. Select EverFocus EKB200 in the Port field (1).

    Note.

    As the control panel is connected to the computer via USB, then you can leave default Rate, Parity, DTR and RTS settings.

  4. To apply settings, click the Apply button (2).

Even if there are no PTZ cameras in the system, there will be events (when buttons are pressed and the joystick position is changed) from the Control panel object corresponding to EverFocus EKB200 telemetry control panel. These events will be displayed in the event log and they can be used in scripts and macros (see also TELEMETRY_EXT Keyboard in Guide for creating scripts (programming)).

EverFocus EKB200 telemetry control panel is now configured.

  • No labels