Documentation for Axxon PSIM 1.0.0-1.0.1.

Previous page Features of Cisco IP device configuration  Characteristics of joint operation of Jassun and Bosch cameras Next page


Features of audio subsystem configuration

Mobotix IP camera supports the following formats of video compression in Axxon PSIM:

  1. MJPEG;
  2. MxPEG.

Audio subsystem of Mobotix IP devices may be used when video is encoded in MxPEG.To choose this format, select the MxPEG codec in video stream settings on the settings panel of the Camera object (see Configuration of multistream video).

By default, video is received in MJPEG format and audio subsystem functionality of IP device is not performed.

Mobotix IP cameras that support sound are Q24M, D12, M22 and others. Detailed description of the supported models and features of their configuration can be found in Documentation Drivers Pack.

Note.

If MxPEG codec and MxPEG decompressor are in use, then video can be not displayed in Axxon PSIM. In this case the value of the MxpegResetCounter registry key should be lowered MxpegResetCounter, specified by default – see Registry keys reference guide.

Features of IO configuration

Due to the peculiarities of the Mobotix M16A / M16B / S16D / S16B camera software, when using the Mobotix MX-232-IO-BOX module, Axxon PSIM can track the state of only one of the two sensors. For example, if you first close the first sensor, and then close the second sensor, Axxon PSIM will display the state of only the first sensor, and the second one will be ignored.

Up to 5 Mobotix MX-232-IO-BOX modules can be connected to Mobotix M16A / M16B / S16D / S16B IP cameras. When several modules are connected, the numbering of sensors and relays in the Axxon PSIM is continuous: sensor/relay number 1 and 2 should be set for the first module, 3 and 4 for the secont etc. The sensor numbers must match the relay numbers.

In case of problems with receiving/sending an event from sensor/relay of the Mobotix MX-232-IO-BOX module, it is recommended to restore the default settings in the web interface of the IP camera.