Go to documentation repository
On the page:
Note
Details on how to configure IP devices using the Web interface are given in reference manuals to corresponding devices.
Features of configuring Panasonic IP devices (i-Pro series) using the Web interface
If a Panasonic IP device (i-Pro series) is configured to simultaneous transmission of video streams in MJPEG and MPEG-4 formats, then video stream rate in MJPEG format is limited by 5(10) fps.
Note
WV-NP1000\1004, WV-F284, WV-NP240\244, WV-NS202 and other models belong to IP devices of i-Pro series.
Features of configuring Samsung IP devices using the Web interface
An audio input gain for Samsung SNC-B2315 IP device is configured using Setup → Video & Audio Configuration → Input Gain. By default the Input Gain parameter equals 0 and audio signals are not played back by IP device. To play back audio signals select the value of the Input Gain parameter from 1 to 10 depending on the required audio input gain.
Samsung SNC-M300P IP device supports dual stream mode of video compression in MJPEG and MPEG-4 formats. If the value 25 fps is selected for the frame rate of MJPEG video stream (the Frame Rate parameter), then the range of values of analog parameter for MPEG-4 format is restricted by 3fps. To extend the given rate the value less than 25fps for the Frame Rate parameter of MJPEG-video stream is to be selected.
Features of configuring Mobotix IP devices using the Web interface
Resolution of Mobotix MX-Q22M-Sec-D11 panoramic camera is determined by selected mode of video displaying (Display Mode) in the Setup Menu tab.
Display Mode | Resolution |
Full Image | 2048*1536 |
Normal | 1456*1088 |
Surround | 1456*1088 |
Panorama | 2048*768 |
Double Panorama | 1456*1088 |
Focus Panorama | 1456*1088 |
Note
In the Double Panorama mode the screen is devided by horizontal line into equal areas, each of which displays panoramic video.
As a Mobotix MX-Q22M-Sec-D11 camera is a panoramic one, proportions are distorted in Axxon PSIM™. The Normal mode is recommended to be set for proper video displaying.
Features of configuring Sony IP devices using the Web interface
The Light Funnel function is used for sensitivity enhacement of Sony SNC-CM120 IP device. The settings are accessed in Setting -> Camera -> Sense up tab.
Enabling the Light Funnel option leads to changing the range of values of the following settings in Axxon PSIM™:
- Videostream rate;
- Video resolution (in MJPEG format).
Configuring Axxon PSIM using the Light Funnel option:
| Setting in Axxon PSIM™ | Implementation of a setting in Axxon PSIM™ | Range of values | |
|---|---|---|---|
| The Light Funnel is disabled | The Light Funnel is enabled | ||
| Videostream rate | The Speed slider on the settings panel of the Video capture device object | Not more then 10fps | Up to 30 fps |
| Video resolution (in MJPEG format) | The Resolution dropdown list on the settings panel of the Camera object | Full (1280*960) High (960*720) Standard (640*480) | Standard (640*480) |
Example
If Full resolution is set with enabled Light Funnel option, then video is displayed in standard resolution.
Overview
Content Tools