Go to documentation repository
The GRELE object corresponds to the Relay system object.
The GRELE object sends events presented in the table. Procedure is started when the corresponding event occurs.
Event | Description |
OFF | Relay is off |
ON | Relay is on |
SIGNAL_LOST | Connection lost |
List of commands and parameters for the GRELE object is presented in the table:
Command—command description | Parameters | Description |
"ON"—enable relay | - | - |
"OFF"—disable relay | - | - |
"SETUP"—settings for relay | chan <> | Output number (0–15) |
flags<> | Flags | |
name<> | Object name |
Properties of the GRELE object are shown in the table.
Properties of the GRELE object | Description of properties |
ID<> | Object ID |
PARENT_ID<> | Parent object ID |
REGION_ID<> | Region ID |
The GRELE object can be in the following states:
State of the GRELE object | State description |
"ON" | Relay is on |
"OFF" | Relay is off |
"DETACHED_ON" | Connection lost, relay was on |
"DETACHED_OFF" | Connection lost, relay was off |
Overview
Content Tools