Go to documentation repository
There is a special option for viewing video sequences from surveillance cameras with the analog monitors – analog video out. To activate this option with FS-5, FS-6 and FS-16 video capture cards, the additional card is used – analog video out card.
The analog video out card is used for direct video signal output from one of the cameras connected to the Server to the analog monitor (with no digitization).
The analog video out card has three connectors compatible with FS-5, FS-6 and FS-16 video capture cards.
Install the analog video out card as follows:
- Make sure that the video capture card power supply is off (either the computer with installed video capture card is off or the video capture card is not installed).
- Install the analog video out card on the video capture card using special connectors on the video capture card.
- Connect the interface cable of the analog monitor to the red BNC connector of the video-in cable connected to the video capture card.
Overview
Content Tools