Go to documentation repository
PTZ control panel allows controlling all types of PTZ devices connected to the system.
To access PTZ controls, select 
fin the list corresponding to the given PTZ device.
The elements of the PTZ control panel are described below.
Move camera lens up-down and left-right:
Move camera lens across and diagonally:
Camera lens stops moving while changing the orientation:
Set conditional speed of the camera lens movement while changing the focus:
Note
The conditional speed is set separately for each of the cameras. The default speed is 5. The set value is automatically saved for all users within one server.
Certain types of cameras allow adjusting focus and image scale.
Focus is adjusted with the following control element:
Focus is set with the 
and 
buttons. Apart from that, the focus may be set automatically. To do so, select 
with the mouse pointer and, when the text in the box changes to Auto, click it with the left mouse button.
Zoom lens (zoom-in) is set with the following control elements:
Zoom-in and zoom-out is set with the and buttons.
In addition, to make control of PTZ units more convenient, the PTZ units may also be controlled with the user settings. User settings include the data describing PTZ focus, as well as camera lens zoom and focus.
PTZ user settings are selected and adjusted by the Preset group of control elements.
To select a preset user setting, click the corresponding number of the setting with the left mouse button. After a short delay, the number of the selected setting becomes highlighted in red and the heading of the given control element group changes to Go to present No. <number of the selected setting>, whereas current PTZ settings will be coordinated with the selected user setting.
To adjust a user setting, click the setting number with the left mouse button and hold it for a few seconds until the setting number becomes highlighted in red and the heading of the control elements group changes to Save preset No. <number of the selected setting>.
After this operation, the current settings of the PTZ unit will be recorded into the selected user setting.
Note.
When IP device Lilin is used, user setting is done differently:
- set the number of user setting with the left mouse click upon it;
- set the PTZ unit to the required position;
- press and hold the left mouse button upon the set number of user setting for a few seconds until the number is lighted in red and text of the headline of PTZ units will be changed to Save preset №<number of the selected setting>.
To change the size of the PTZ control window, move the mouse pointer holding the left mouse button pressed in the lower right corner of the window.
Overview
Content Tools