Go to documentation repository
The PTZ section is used for setting the telemetry control elements.
The settings panel for the PTZ section is shown in the figure.
The parameters of the PTZ settings panel are described in the table.
No | Parameter name | Field type | Description | Representation | Default value | Value range |
1 | The Delay between commands (ms) field | Type-in the value | Sets the delay time between executing the commands for PTZ devices This parameter is not supported by IP cameras. | ms | 250 | No limitations. It is not recommended to change the default value. |
2 | The Delay by priority (ms) field | Type-in the value | Sets the delay time before switch from the PTZ control to a user with lower or equal priority. | ms | 30000 | No limitations. It is not recommended to change the default value. |
| The Joystick group | ||||||
| 3 | The Sensitivity (1-10) field | Enter the value in the field | Sets sensitivity of the joystick: the less value the more sensitivity. If value of parameter is small then camera will react on even small deviations of the joystick. If value of parameter is great the camera will stay fixed until significant deviation of joystick | Sensitivity in conditional units | 5 | 1-10 |
Overview
Content Tools